TWAcomm.com
Sales staff available
Mon-Fri, 7AM - 5PM PST
877-389-0000
Home
Catalog
Info Center
Help
Your Account
 
  view cart check out  
HomeInfo CenterCables and Con> Versatap
   
   
GSA Schedule Contract Number: GS-35F-0419X and Federal CAGE Code: 1WXV7    Share    Email This Page To A Friend! Email Page 
"Same Day Shipping" not available on orders under $100
Government ordering information

FacePlates
All Allen Tel Plastic Faceplates are constructed of flame retardant UL94V-O rated material. They will accept all Versatap jack modules.

Faceplates List

ImageModel #Description
AT30-1One port faceplate constructed of flame retardant UL94V-0 rated material. Accepts all Versatap jack modules.
AT30-2Two port faceplate constructed of flame retardant UL94V-0 rated material. Accepts all Versatap jack modules.
AT30-3Three port faceplate constructed of flame retardant UL94V-0 rated material. Accepts all Versatap jack modules.
AT30-4Four port faceplate constructed of flame retardant UL94V-0 rated material. Accepts all Versatap jack modules.
AT30-6Six port faceplate constructed of flame retardant UL94V-0 rated material. Accepts all Versatap jack modules.
AT30D-12Twelve port faceplate constructed of flame retardant UL94V-0 rated material. Includes 4 blanks. Accepts all Versatap jack modules.
AT106PFace plate designed for AT106, AT106H, and AT107 IDC flush jacks.
AT106HVersatap jack housing is designed to accept all Versatap modules.
AT45D-8Double gang 8 port faceplates offer better external protection and help maintain the proper bend radius that is required for Category 5 and fiber patch cords. Accepts all Versatap snap-in modules and fits over the AT30M or AT45MB surface mounting boxes. Fits flush when using the AT90 or AT92 bracket.
AT45S-4Single gang 4 port faceplates offer better external protection and help maintain the proper bend radius that is required for Category 5 and fiber patch cords. Accepts all Versatap snap-in modules and fits over the AT30M or AT45MB surface mounting boxes. Fits flush when using the AT90 or AT92 bracket.

ATBK Stainless Steel Faceplates
Allen Tel products new stainless steel faceplates are designed for use with the entire Versatap line of products including Cat5E and Cat6. The new design allows the jack to fit flush with the faceplate, eliminating the jack from protruding through the faceplate. Various port configurations are available for installation in standard EMA single gang outlet boxes or the Allen Tel standard EMA boxes.

  • ATBK-VT Stainless Steel Faceplate 1 Port
  • ATBK-VT-2 Stainless Steel Faceplate 2 Port
  • ATBK-VT-4 Stainless Steel Faceplate 4 Port
  • ATBK-DV-4 Stainless Steel Double Gang Faceplate 4 Port
  • ATBK-DV-6 Stainless Steel Double Gang Faceplate 6 Port


Surface Jack Housing & Mounting Boxes

AT44 Surface Jack Housings
Versatap 4 port housing designed for use with Versatap Category 3 and 5 jack modules. Constructed of high impact self extinguishing plastic rated UL94V-9. The AT44 will accept all Modules except BNC, TNC Connectors, and AT55SH.

AT30M Surface Jack Mounting Box
Versatap single gang surface mount backplate used with AT33S faceplates. Designed for use with Versatap Category 3 and 5 jack modules. Constructed of high impact self extinguishing plastic rated UL94V-9. Package of 5.

AT45MB Surface Jack Mounting Box
Versatap double gang surface mount backplate used with AT33D faceplates. Designed for use with Versatap Category 3 and 5 jack modules. Constructed of high impact self extinguishing plastic rated UL94V-9. Package of 5.

AT33 Surface Jack Housing - The AT33 will accept all modules except Blanks, Coax Connectors, and AT55SH.
    AT33S:
    Versatap single housing surface mount housing used with AT30M back plates. Accepts all Versatap modules except blanks, coax connectors and AT55SH.

    AT33D:
    Versatap duplex housing surface mount faceplate used with AT45MB back plates. Accepts all Versatap modules except blanks, coax connectors and AT55SH. Can be mounted directly to the wall.



Patch Panels

AT55A-PNL Cat5e 110 Patch Panel
High speed performance, Allen Tel`s Category 5e modular to 110 printed circuit board (PCB) Patch Panels are designed to support 155MHz cross connect transmission for UTP cabling systems utilizing Category 5e compliant or performance rated cable.
Features:
  • Exceeds Category 5e requirements
  • Identification strips
  • Wire management on rear of panel and AT55CSB cable support bars
  • Printed circuit board technology
  • Wiring: T568B and T568A


AT55A-12PT 12 Port Cat5e Patch Panel
The AT55A and AT55B-12PT 12 Port Category 5e patch panels are designed for small voice and data cross connect installations. They are equipped with 2 - 6 port Category 5e non-keyed jack modules and mounted on a GB89D mounting bracket.

ATPNL 12 - 128 Port Patch Panels
Designed for use with all Allen Tel Versatap Category 3, Category 5e jacks and the AT55C-00 coupler, COAX and TV modules. This design allows full flexibility when formulating your LANS, cabling systems, data processing networks or telecommunications panels. These 19 inch (482.6mm) panels are constructed of 16

AT55A-12P Cat5e 12 Port Patch Box
Allen Tel`s new Category 5e 110 patch box is designed with the installer in mind, by providing the highest level of application and installation flexibility for fast, affordable solutions. The AT55A/B-12P contains multiple knockouts to accommodate a variety of cable entries, cable ties are furnished to assure undisturbed connections. Easy cover removal allows for fast and easy access for adds, moves and changes. Port and station identification can be accomplished by using the furnished ID Labels under the removable protective window. Mounting options include screws for direct mounting to a backboard or wall. The AT55A/B-12P is equipped with a GB89D Bracket.

AT55A-6P Cat5e Patch Box
This design is perfect for small data installations e.g. the S.O.H.O. market (Small Office/Home Office) and flexible enough to support larger Category 5e applications.
Features:
  • UL/CSA approved
  • 110 termination
  • Internal wire management
  • Designation strips with protective covers
  • Designed with an unprecedented toughness to meet the needs of most work environments



Modular 5e V.I.P. Jacks

AT55 series Versatap Jacks
AT55 series jacks are designed to accommodate the Versatap Category 5e system. The AT55 jacks are available in a wide range of colors to meet customers requirements and with a color coded label on each jack to accommodate either TIA-568A or TIA-568B Wiring. Will accept 22/24 AWG wire.
  • Wiring
    A color coded label is affixed to each jack to accommodate either TIA-568A or TIA-568B.


  • AT55SH Fully Shielded Jack
    Allen Tel offers a Category 5e fully shielded jack. The AT55SH-09 series jack provides the highest isolation for EMI, RFI emission. The AT55SH will accept 22 thru 26 AWG solid or stranded STP cables and complies with TIA568A and TIA568B wiring and UL approved. The AT55SH fits all Versatap products except AT33 and AT44 surface jack housings.


    AT55C Cat5e Snap In Coupler - Introducing Allen Tel products coupler for performance characteristics beyond Category 5. The AT55C-00 coupler is a proven performer when used with Category 5 cabling applications. The AT55C-00 exceeds proposed ANSI/TIA/EIA568A Category 5 connectivity performance requirements. The AT55C-00 is designed for use with Allen Tel ATPNL series of Versatap patch panels. Will not fit Versatap surface mounting boxes or angled Versatap face plates.




    Versatap Modular System

    AT34 Jack, 6 Position, 4 Conductor
    Electrical certification and specifications: meets FCC part 68, U.L. listed, EIA/TIA-568 faceplates and jack housings: high impact, self extinguishing plastic, rated UL94V-0 modular jacks. Contacts: phosphor bronze plated with 50 micro-inches of gold over 100 micro-inches of nickel. Connectors: IDC-22/24 AWG insulated wire. Data rate: compatible with 10 Mbps IEEE 802.3 (10 Base T) and 16 Mbps token ring applications.

    AT36 Jack, 6 Position, 6 Conductor
    Electrical certification and specifications: meets FCC Part 68, U.L. listed, EIA/TIA-568 faceplates and jack housings: high impact, self extinguishing plastic, rated UL94V-0 modular jacks. Contacts: phosphor bronze plated with 50 micro-inches of gold over 100 micro-inches of nickel. Connectors: IDC-22/24 AWG insulated wire. Data rate: compatible with 10 Mbps IEEE 802.3 (10 Base T) and 16 Mbps token ring applications.

    AT38 Jack, 8 Position, 8 Conductor
    Electrical certification and specifications: meets FCC Part 68, U.L. listed, EIA/TIA-568 faceplates and jack housings: high impact, self extinguishing plastic, rated UL94V-0 modular jacks. contacts: phosphor bronze plated with 50 micro-inches of gold over 100 micro-inches of nickel. Connectors: IDC-22/24 AWG insulated wire. Data rate: compatible with 10 Mbps IEEE 802.3 (10 Base T) and 16 Mbps token ring applications.




    Modular 5e Patch Cords

    High powered performance Category 5e enhanced patch cords wired to TIA-568a. Introducing Allen Tel products enhanced category 5EV patch cords to ensure optimum headroom for performance beyond category 5e. Patch cords are a vital link in any network, an inferior device can bring your system below category 5e levels. Allen Tel`s next generation of enhanced patch cords eliminates that fear and allows the system to perform to its ultimate potential. Our enhanced Category 5EV patch cord achieves more headroom with significantly less crosstalk.

     
    Advanced Search
    Contact Us
     
     
      
    top
    ICCProducts.com is a leading provider of data, voice, audio/video, and fiber optic products. We specialize in networking for data, voice, audio/video, and fiber optic products . All orders, small or large, are welcomed with no minimum order requirements.
    GSA, Visa, MasterCard, and American Express Credit Cards Accepted
    All logos displayed on this page are registered trademarks with their respective organizations.
    Copyright © 1997 - 2024 TWAcomm.com, Inc. All rights reserved. - 3/28/2024 3:44:36 AM - v.8.0.16